For homeowners to stay safe and away from respiratory and skin health hazards, home remediation is considered to be an important process. Mold remediation eradicates and encapsulates mold from its sources. Mold remediation is highly considered when dealing with the real estate market. Some operators in the industry can take advantage of buyers who are uneducated when it comes to mold growth. Either they will not tell you that the house you are planning to buy has a mold infestation, or they will convince you to get it when it is not even needed.
Mold Within the Home – The Basics
Mold is a familiar condition in many homes. Wetter areas of the country have moldier homes, and even homes in dry areas have certain rooms and spaces that are more prone to developing mold.
Where there is moisture in a home, there is undoubtedly mold. The most familiar example of mold is the type that develops in the grout between ceramic tiles. A simple form of homeowner-driven mold remediation happens each time you spray that mold down with a bleach-based cleaner and wipe it off. More critical mold, either from a health or aesthetic standpoint, happens elsewhere.
Do Not Ignore:
There is a big chance that you will find mold in places you never thought of at home. Wherever there is moisture and high humidity, mold can develop and they produce hazardous mycotoxins that can threaten your respiratory system. Homeowners who have respiratory problems are at high risk from mold, and the ones who do not have yet are very likely to soon have the same problem. The presence of mold is not very inviting to the eye, whether it be from the homeowners’ perspective or even their visitors’. It is a sign the house somehow is being neglected and is the start of decay is very possible. Mold also negatively affects your home insulation.
Where does mold develop at home?
Where there is water, mold can develop. Any excess in humidity or moisture level in an area can cause it. Interestingly, newer homes which are more insulated are the ones that are more prone to mold growth. Insulation materials like fibreglass are haven for mold growth which is very difficult to remove and eradicate.
Here is a list of the areas at home where mold growth is highly likely to develop:
- Crawl spaces below your flooring
- Wall interiors
- Kitchens and under sinks
- Around chimneys
- Near heating, ventilation and air conditioning (HVAC)
Mold Remediation – The Process
As noted by the Environmental Protection Agency (EPA), the homeowner may remediate any mold areas that are less than 10 square feet (about 3×3 feet). Anything bigger than that and you may want to contact your mold remediation contractor in your area. A good example is a mold inspection in Tampa that can provide that type of service. A general contractor may not work as efficiently as a mold remediator contractor which has more expertise on the matter.
For homeowners, cleaning and removing mold with chlorine bleach can do the trick. However, it is not an EPA-approved agent for eliminating mold. Especially if mold is very much concentrated in a small area, it is better to have it done by professionals.
Ventilation and Mold Containment
The first and most important step in mold remediation is containment and ventilation setup. It is a must that your ventilation and air filtration devices (AFDs) are properly installed. This ensures that your airflow will avoid affecting the mold spores and not spread it around the house.
Cleaning and Disinfecting
Once you have secured your ventilation, then you can now go to the cleaning and disinfecting stage. This is where the actual disposal of infected materials and mold remediation takes place. Once they are removed, the biocide/fungicide/moldicide, whichever solution is needed is applied by the technician.
Fixing the Mold Source
After disinfecting, the technicians can now check for moisture and humidity concerns. They will need to inspect the areas where mold growth may develop. Most of the time, the mold remediation company may repair it themselves, or hire a subcontractor if necessary.
Encapsulating the Mold
Encapsulating mold is a process in which a mold sealant is applied to a surface in order to prevent mold growth. It is an approved method of mold removal at home.
READ MORE: How to Spice Up Your Bathroom with Artwork